Garden Lights · YMG

TYD1104

Jasmine Garden Light

TYD1104 is a pole-mounted garden light with a broad circular crown and a smooth jasmine-inspired PC cover. A die-cast aluminium body supports separate solar and AC assemblies for residential gardens, courtyard entrances and landscaped paths.

Solar 25W / AC 50WIP653000K–6500K
TYD1104 · Solar 25W · 3000K warm white

Enquire about this model TYD1104 English specification ↓ (PDF · 5.1 MB)

Black; other colours can be customised

Overview

A smooth flower-inspired head through the landscape.

The shallow cap and narrowing white cover make the crown a recognisable feature in a garden scheme. Select solar power for a position with suitable panel exposure or the AC assembly for a planned mains supply, keeping the same exterior form across the site.

A smooth jasmine profile.

The wide crown and narrowing cover give residential landscapes a consistent fixture form.

Two electrical assemblies.

Choose solar or AC to match the site’s power arrangement.

One exterior head size.

The same crown can be specified while keeping version-specific output and weights separate.

Explore TYD1104 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Choose the electrical assembly for the site first, then the light appearance; retain the same smooth jasmine crown.

Power version

Power version

Light colour

Light colour
Your selected configuration TYD1104 · Solar 25W · 3000K warm white

Solar operation and controls The listed solar working-time record is 12 hours (3–5 rainy days). Review charging conditions at the intended panel position when planning operation. Solar runtime and battery figures do not describe the AC version. For the solar assembly, operate the waterproof push-button in darkness and allow approximately 10 seconds for automatic illumination.

Specifications

Technical specifications

Electrical, construction and component records for TYD1104.

TYD1104 English specification ↓ (PDF · 5.1 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolarAC
LED source 2835 SMD 3030 SMD
LED quantity 160 pcs 160 pcs
Rated power 25W 50W
Input voltage DC3.2V AC220–240V
Luminous flux 1249 / 1344 lm (3000K / 6500K) 4826.57 / 5074.16 lm (3000K / 6500K)
CRI CRI ≥ 80 CRI ≥ 80
Beam angle 180° 180°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Frequency — 50Hz
Solar panel Monocrystalline, 25W / 5V —
Battery 3.2V / 30000mAh —
Listed working time 12 hours (3–5 rainy days) —
Battery chemistry LiFePO4 —
Construction & installation
SpecificationSolarAC
Material Die-cast aluminium + PC cover Die-cast aluminium + PC cover
Net weight 6.47kg 4.18kg
Lamp-head size Φ530 × 78 × H440mm Φ530 × 78 × H440mm
Installation diameter Inner diameter: Ø76mm; outer diameter: Ø78mm Inner diameter: Ø76mm; outer diameter: Ø78mm
Installation height 2.5–6m 2.5–6m
Colour Black; other colours can be customised Black; other colours can be customised
Protection IP65 IP65
PC optical-cover transmittance (listed) Up to 90% —
Solar fixing detail 4 hexagonal screws —
Operating conditions & component data
SpecificationSolarAC
Operating temperature −25°C to 50°C −25°C to 50°C
Working humidity 10%–90% 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours —
Battery cycle life (listed) More than 2,000 charge/discharge cycles —
Solar start-up wait (listed) Approximately 10 seconds; illumination only in darkness —
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

A wide cap over a smooth narrowing PC cover.

The white cover curves from the broad circular crown into the central mounting body. This smooth jasmine-inspired form is the decorative feature, with a separate top treatment for the solar panel or AC cover.

A top-mounted panel. A waterproof push-button.

The solar assembly combines Monocrystalline, 25W / 5V with a 3.2V / 30000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Identify the waterproof push-button before following the solar activation instructions.

Aluminium support around a smooth PC cover.

The material record combines die-cast aluminium and a PC cover. The mounting-connector close-up identifies the pole interface, while the shade close-up explains the continuous white form below the crown.

Consult the original specification for the AC light-distribution curve and its corresponding electrical and luminous-flux record.

Installation

Check the head size and the pole interface.

Review the complete fixture dimensions and its mounting interface.

The diameter and head-height measurements describe the luminaire rather than the complete pole. Match the central connector to the planned pole and use the fixing instruction for the selected power assembly.

Listed fixture dimensions: Φ530 × 78 × H440mm.

The recommended garden-light installation height is 2.5–6m. Match the pole connection to the listed inner diameter of Ø76mm and outer diameter of Ø78mm.

Packing

One head per carton. Two weight records.

ConfigurationPackingUnitsCarton sizeNet weight, referenceGross weight, reference
Solar Outer carton 1 540 × 540 × 470mm 6.47kg 7.88kg
AC Outer carton 1 540 × 540 × 470mm 4.18kg 5.6kg

Housing colour

Black; other colours can be customised

FAQ

Questions about TYD1104.

Is this model solar or mains-powered?

Both are listed as separate assemblies: solar 25W and AC 50W. Select the required supply before comparing output and weight.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 25W / 5V and a 3.2V / 30000mAh LiFePO4 battery. A wide cap over a smooth narrowing PC cover.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 4 hexagonal screws. Use the model’s illustrated fixing arrangement. Confirm the supplied fixing arrangement for the AC assembly separately.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 12 hours (3–5 rainy days). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include solar or AC supply, colour temperature, preferred finish and the planned pole arrangement, with order quantity.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

TYD1104 Product preview TYD1104 · Solar 25W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

TYD1104

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
TYD1104 · Solar 25W · 3000K warm whiteEnquire →