TYD1104 Garden Post Lights in Residential Landscapes
Four installation views show TYD1104 beside garden paths, residential courtyards and an access road, with solar and AC options for project buyers.

YMG is sharing four installation photographs of TYD1104 garden post lights along planted paths, residential courtyards and a landscaped access road. The night views show the jasmine-shaped lamp heads beside brick paving, dense hedges, palm trees and building entrances. Together, they give project buyers a closer look at how the same light fitting appears in different outdoor settings.
For landscape designers, lighting distributors and contractors, the photographs also raise practical selection questions. How does the lamp head sit above the planting? Which power version suits the site? What should be checked before choosing poles and positions? TYD1104 offers separate solar and AC assemblies within the same exterior design.
Decorative garden lighting with a jasmine profile
These post-top garden lights have a broad circular crown and a smooth white cover that narrows towards the pole connection. The English specification describes a design inspired by jasmine. In the photographs, this flared shape remains visible against trees and buildings, while the narrow poles leave much of the surrounding landscape in view.
The lamp head measures 530 mm in diameter and 440 mm in height. These measurements describe the head, rather than the complete installed pole and light. Its die-cast aluminium body supports a PC cover, and the specified mounting socket has a 76 mm inner diameter.
Using the same head shape across several parts of a site gives the lighting a consistent appearance. The photographs show this repetition along paths, near changes in level and beside a vehicle access area. Buyers can compare the full dimensions and assemblies on the TYD1104 Jasmine Garden Light product page.
Garden pathway lighting beside hedges and steps
The first photograph shows TYD1104 beside a brick path that leads to a short flight of steps. One fitting stands in the foreground near the edge of the paving. Another appears beyond the steps, continuing the same lamp-head shape through the planted route.
The close view is useful for judging the relationship between the fitting and its surroundings. The head sits above the nearby hedge, with trees behind it and paving below. Light is visible on the path and on parts of the planting, showing the setting from a pedestrian’s viewpoint.
For garden pathway lighting, mark bends, junctions and level changes on the layout before confirming positions. Review the steps separately, including how each tread appears from both directions. The planting plan also matters: a hedge that sits below the head today may grow into its light path later.

Residential landscape lighting around courtyards
The two wide courtyard photographs show TYD1104 among palms, low planting and curving walkways beside multi-storey buildings. A covered walkway and a curved entrance canopy add horizontal lines around the slender posts. The repeated circular heads provide a recognisable detail across these spaces.
These views show why residential landscape lighting needs to relate to the whole route. A person may move from an open courtyard into a covered passage, then towards steps or a building entrance. Review those transitions together when selecting courtyard lighting, so that the layout responds to how people use the space.
Nearby windows and seating areas also deserve attention. Compare the proposed lamp positions from inside adjacent rooms and from places where people stop or sit. A sample can help the project team judge the visible lamp head alongside the building’s other lights.
TYD1104’s smooth crown is one option within the YMG garden light collection, which includes other head shapes for different landscape styles.

Landscaped access road lighting with TYD1104
The fourth photograph shows rows of post lights beside an access road, with parked vehicles, trees and a marked crossing in view. The repeated fittings continue towards the buildings in the distance, showing the design at a larger site scale than the close path photograph.
For residential entrance lighting, consider the relationship between the posts, parking spaces and pedestrian routes. A light placed beside a planting bed needs a different position check from one beside a parking bay. Review vehicle clearance and the view towards the entrance when planning the arrangement.
The photograph is a visual reference for the setting. A road or parking-area lighting plan still needs project-specific calculations using the selected assembly, mounting height and light-distribution data. Confirm the required lighting level with the project team before fixing the final quantity or spacing.

Choosing solar or AC TYD1104 garden post lights
TYD1104 is available as a 25W solar assembly or a 50W AC assembly. Both versions of these LED garden lights retain the jasmine-shaped head, but their electrical components and output records differ. Specify the version before comparing performance or requesting a quotation.
| Specification | Solar version | AC version |
|---|---|---|
| Rated lamp power | 25W | 50W |
| Input voltage | DC 3.2V | AC 220–240V |
| Solar panel | Monocrystalline, 25W / 5V | Not applicable |
| Battery | 3.2V / 30,000mAh | Not applicable |
| LED source | 2835 SMD | 3030 SMD |
| Body and cover | Die-cast aluminium and PC | Die-cast aluminium and PC |
| Protection rating | IP65 | IP65 |
Solar garden post lights need suitable daylight at the panel position. The trees, palms and covered structures visible in these photographs are useful reminders to check shade throughout the day. Allow for future plant growth, and discuss the intended operating hours with YMG against the site’s charging conditions.
AC-powered garden lights suit projects with a planned mains supply. Review the supply and cable route with the installation team, and use the AC specification when selecting components. The two assemblies should remain separate in the quotation and project documents.
Matching the light colour to the setting
The illustrated light-colour options are 3000K warm white and 6500K white light. Compare these with the surrounding entrance, façade and landscape lighting before making a selection. For an existing residential courtyard, a sample is useful when a close visual match matters.
Photographs can show the overall atmosphere, but camera exposure and white balance affect how the colour appears. State the required colour temperature in the order instead of selecting it only from a night photograph.
Black is the listed housing colour, with other colours available for customisation. Include the preferred finish when discussing the poles and lamp heads as a complete visual arrangement.
Preparing a TYD1104 project enquiry
For a quotation or sample request, send YMG the information that determines the assembly and layout:
- A site plan with path widths, steps, parking spaces and proposed light positions.
- The required solar or AC version, plus daylight conditions where solar power is being considered.
- The planned mounting height, pole drawing and connection dimensions.
- The preferred colour temperature and housing finish.
- The quantity, destination market and any project-specific document requirements.
For park walkway lighting or a residential garden scheme, photographs taken from the actual proposed positions add useful context. Include nearby trees, covered areas and buildings so the team can review the fitting within the landscape.
Questions about TYD1104 garden post lights
Can TYD1104 be fitted to existing poles?
The specification shows a mounting socket with a 76 mm inner diameter. Compare it with the actual pole-top dimensions and fixing arrangement. Have the project team confirm that the pole and foundation suit the selected luminaire and site conditions.
Does the 440 mm dimension describe the complete light pole?
No. It is the lamp-head height. The head diameter is 530 mm, and the pole height must be specified separately for the project.
Can the same exterior design be used with different power supplies?
Yes. TYD1104 has separate solar and AC versions with the same main head dimensions. Identify the version required for each location, and keep the corresponding electrical and output data with that selection.
Discuss TYD1104 for your landscape project
These installation views show TYD1104 beside brick steps, planted courtyards and an entrance road. To review the model for your own site, send your TYD1104 project requirements to YMG. Include the preferred power version, light colour, pole arrangement and quantity so the team can discuss the configuration, quotation and sample requirements.