GGD4205 combines a square lantern with a clear PC shade and a fluted decorative post. The Solar version carries a panel on its low square cap. The specification also illustrates a raised pavilion-style AC roof. Choose 1m, 2.1m or 2.6m overall height and specify the required power version.
The transparent shade reveals the light assembly inside the square head. Curved transitions beneath the cap soften its geometric outline, while the fluted post gives the complete fixture a traditional profile.
The supplied application illustrations show GGD4205 along garden paths, planted boundaries and residential approaches. Compare the overall height with nearby walls and landscaping before selecting the assembly.
Planning your lighting project?
Share your model, installation site and quantity with our team.
Solar operation and controls The light-sensor working-time entry is 3–5 rainy days. Activate the Solar switch in darkness and wait approximately three seconds.
Specifications
Technical specifications
Solar and E27 AC records are shown separately. Select the power version and complete fixture height when preparing the enquiry.
Component lifespan statements describe components and do not define a whole-luminaire warranty.
Solar electrical & construction record
Specification
Solar
Rated power (listed)
10W
Input voltage
DC 3.2V
Monocrystalline solar panel
10W / 5V
Battery capacity
3.2V / 12,000mAh
Battery chemistry
LiFePO4
LED source
2835 LED
LED quantity
60 pcs
Luminous flux at 3000K
362lm
Luminous flux at 6500K
399lm
Colour-temperature range
3000K–6500K
Illustrated light colours
3000K warm white / 6500K white light
Colour rendering index (listed)
CRI >80
Beam angle
180°
Protection rating
IP65
Material
Die-cast aluminium + PC lens
Housing colour
Black; other colours can be customised
E27 AC light-source record
Specification
E27 AC
Light source
E27
Input voltage
Customised to the selected E27 light source
Rated power
Customised to the selected E27 light source
Luminous flux
Customised to the selected E27 light source
Assembly dimensions
Dimension
1m
2.1m
2.6m
Overall fixture height
1000mm
2100mm
2600mm
Head width shown in drawing
300mm
300mm
300mm
Base width shown in drawing
260mm
260mm
260mm
Solar operating conditions & component statements
Specification
Solar
Light-sensor working-time entry
3–5 rainy days
Operating temperature
−25°C to 50°C
Working humidity
10%–90%
Solar switch activation
Switch on in darkness; wait approximately 3 seconds
Battery cycle life (component statement)
More than 2,000 charge/discharge cycles
LED-chip lifespan (component statement)
80,000–100,000 hours
PC shade light transmittance (stated)
Up to 95%
Installation spacing
5–8m
Construction
Inspect the head. Understand the assembly.
The English specification illustrates separate 3000K and 6500K diagrams. Request the photometric file for the selected assembly when preparing a project calculation.
A transparent shade around the light assembly.
The clear PC shade exposes the circular LED layout and central support of the Solar head. Its four sides taper into the lower die-cast connection. The source states light transmittance up to 95% for the shade.
A square panel above a concealed switch.
The Solar cap carries the monocrystalline panel. This version uses a concealed waterproof switch. Activate it in darkness and wait approximately three seconds for illumination.
A fluted base beneath the sectional post.
The component image separates the head, post sections and mounting base. The fluted base ends in a fixing flange. The specification describes spliced rods secured with screws.
Installation
Match the height to the mounting position.
The drawings show 1000mm, 2100mm and 2600mm overall heights, each with a 300mm head width.
The base widths shown are 260mm, 260mm, 260mm for the 1m, 2.1m and 2.6m assemblies respectively. Match the drawing to the mounting surface and screw-fixing arrangement.
The 5–8m installation spacing is separate from fixture height. Review the spacing against the site layout and required illumination.
Packing
Pack the selected assembly.
The packing table lists one set per outer carton. Carton size and reference net and gross weights are recorded for each height. Confirm final packing for the selected power version.
Assembly height
Sets per carton
Carton size
Net weight, reference
Gross weight, reference
1m
1
500 × 350 × 680mm
6.5kg
8.95kg
2.1m
1
600 × 350 × 720mm
7.86kg
10.39kg
2.6m
1
890 × 410 × 360mm
11.5kg
14.7kg
Housing finish and artwork
Black is listed; other colours can be customised. Send the preferred finish, logo, labels and carton artwork with the enquiry for review.
FAQ
Questions about GGD4205.
Which heights are available in the drawing?+
The dimension drawing lists 1m, 2.1m and 2.6m overall fixture heights. Each drawing shows a 300mm head width and 260mm base width.
Why do the AC and Solar roofs look different?+
The source illustrates a raised pavilion-style AC roof and a low square Solar cap with a panel on top. Specify the required power version and appearance with the enquiry.
How is the AC light source specified?+
The requested AC configuration uses an E27 light source. Voltage, rated power and luminous flux are customised to the selected source.
Which figures apply to Solar?+
The documented Solar record lists a 10W / 5V panel, 3.2V / 12,000mAh LiFePO4 battery and 60 × 2835 LEDs. These figures are separate from E27 AC.
Which colour options are illustrated?+
The source shows 3000K warm white and 6500K white light. The Solar table lists 362lm and 399lm respectively.
Are weights exact shipping commitments?+
No. The source marks gross and net weights as reference figures. Confirm the final packing record for the selected assembly and power version.