Diamond texture across a square shade.
The PC shade narrows towards the post and carries a repeated raised pattern. The square rim frames the four faces; the close-up shows the texture and the lower connection.
GGD3608 brings a textured, four-sided lantern to a fluted decorative post. Its square cap and tapered PC shade give the head a clear geometric outline. Choose an overall height of 1m, 2.1m or 2.6m, then specify Solar or an E27 AC light source.
The moulded texture remains visible across the four faces of the shade. A slim post carries the same square outline down to a broad fixing base.
The supplied application illustrations place GGD3608 beside landscaped walks, garden walls and residential paths. Select the fixture height around planting, nearby architecture and the walking route.
Share your model, installation site and quantity with our team.
Request a quoteSolar operation and controls The light-sensor working-time entry is 3–5 rainy days. Activate the Solar switch in darkness and wait approximately three seconds.
Solar and E27 AC records are shown separately. Select the power version and complete fixture height when preparing the enquiry.
GGD3608 English specification ↓ (PDF · 3.9 MB)Component lifespan statements describe components and do not define a whole-luminaire warranty.
| Specification | Solar |
|---|---|
| Rated power (listed) | 10W |
| Input voltage | DC 3.2V |
| Monocrystalline solar panel | 10W / 5V |
| Battery capacity | 3.2V / 12,000mAh |
| Battery chemistry | LiFePO4 |
| LED source | 2835 LED |
| LED quantity | 60 pcs |
| Luminous flux at 3000K | 362lm |
| Luminous flux at 6500K | 399lm |
| Colour-temperature range | 3000K–6500K |
| Illustrated light colours | 3000K warm white / 6500K white light |
| Colour rendering index (listed) | CRI >80 |
| Beam angle | 180° |
| Protection rating | IP65 |
| Material | Die-cast aluminium + PC lens |
| Housing colour | Black; other colours can be customised |
| Specification | E27 AC |
|---|---|
| Light source | E27 |
| Input voltage | Customised to the selected E27 light source |
| Rated power | Customised to the selected E27 light source |
| Luminous flux | Customised to the selected E27 light source |
| Dimension | 1m | 2.1m | 2.6m |
|---|---|---|---|
| Overall fixture height | 1000mm | 2100mm | 2600mm |
| Head width shown in drawing | 300mm | 300mm | 300mm |
| Base width shown in drawing | 230mm | 260mm | 260mm |
| Specification | Solar |
|---|---|
| Light-sensor working-time entry | 3–5 rainy days |
| Operating temperature | −25°C to 50°C |
| Working humidity | 10%–90% |
| Solar switch activation | Switch on in darkness; wait approximately 3 seconds |
| Battery cycle life (component statement) | More than 2,000 charge/discharge cycles |
| LED-chip lifespan (component statement) | 80,000–100,000 hours |
| PC shade light transmittance (stated) | Up to 90% |
| Installation spacing | 5–8m |
The English specification illustrates separate 3000K and 6500K diagrams. Request the photometric file for the selected assembly when preparing a project calculation.
The PC shade narrows towards the post and carries a repeated raised pattern. The square rim frames the four faces; the close-up shows the texture and the lower connection.
A monocrystalline panel occupies the top of the Solar head. The waterproof push-button sits along the edge of the light assembly. Operate it in darkness and allow approximately three seconds for illumination.
The supplied parts image shows the lamp head, post sections and broad base. The specification describes spliced rods secured with screws. Match the finished assembly to the selected height.
The drawings show 1000mm, 2100mm and 2600mm overall heights, each with a 300mm head width.
The base widths shown are 230mm, 260mm, 260mm for the 1m, 2.1m and 2.6m assemblies respectively. Match the drawing to the mounting surface and screw-fixing arrangement.
The 5–8m installation spacing is separate from fixture height. Review the spacing against the site layout and required illumination.
The packing table lists one set per outer carton. Carton size and reference net and gross weights are recorded for each height. Confirm final packing for the selected power version.
| Assembly height | Sets per carton | Carton size | Net weight, reference | Gross weight, reference |
|---|---|---|---|---|
| 1m | 1 | 500 × 350 × 680mm | 6.5kg | 8.95kg |
| 2.1m | 1 | 600 × 350 × 720mm | 7.86kg | 10.39kg |
| 2.6m | 1 | 890 × 410 × 360mm | 11.5kg | 14.7kg |
Black is listed; other colours can be customised. Send the preferred finish, logo, labels and carton artwork with the enquiry for review.
The dimension drawing and parameter table list overall fixture heights of 1m, 2.1m and 2.6m. These are complete assembly heights, not installation spacing.
Solar uses the documented panel, battery and integrated LEDs. AC uses an E27 light source; input voltage, power and luminous flux are customised to that source.
No. The 10W record belongs to the documented Solar configuration. AC figures follow the selected E27 light source.
The source shows 3000K warm white and 6500K white light. Their listed Solar luminous flux values are 362lm and 399lm respectively.
Switch the Solar light on in darkness and wait approximately three seconds. The source illustrates a waterproof push-button.
The packing table lists one set per outer carton, with dimensions and reference weights recorded for each of the three heights.
Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.