Pillar Lights · YMG

ZTD0705

Pillar Light

The ZTD0705 pillar light is for gate posts, pillars and entrances. View product and scene photos, compare the specifications, and send your quantity and country for a quote.

Overview

A rounded head for low boundary columns.

The ribbed pumpkin head adds a rounded form to entrance pillars and garden walls. Repeat the compact fixture along a boundary where the lamp remains part of the daytime design.

A distinct lamp-head outline.

The rounded PC shade with vertical pumpkin-like ribs gives this model its own daytime profile.

Solar components in the head.

A 2W / 5V panel pairs with a 3000mAh LiFePO4 battery.

A fixed-base pillar format.

The solar detail specifies 3 expansion screws for the base.

Check the top of the post or wall. Make sure the base fits and the solar panel has access to sunlight.

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose your configuration.

Choose 3000K warm white or 6500K white light for the order. Specify the colour temperature when ordering. Confirm any requirement for an adjustable colour-temperature control with YMG.

Power version

Power version

Light colour

Light colour
Your selected configuration 6000K cool white

Solar operation and controls The light-sensor model lists 3–5 rainy days of use. No nightly hour figure is given. Switch the lamp on in the dark, then wait about 3 seconds for it to light up.

Specifications

ZTD0705 technical specifications

ZTD0705 English specification ↓ (PDF · 4.0 MB)

LED and battery lifespan figures are component ratings. The LED-chip rating is not a warranty for the complete lamp. Weights are reference values.

Electrical & light output
SpecificationSolar
Rated power 2W
Input voltage DC 3.2V
Solar panel Monocrystalline, 2W / 5V
Battery 3.2V / 3000mAh LiFePO4
LED source 2835 LED
LED quantity 20 pcs
Colour temperature 3000K–6500K; examples at 3000K and 6500K
Luminous flux 115 / 108 lm (3000K / 6500K)
Beam angle 180°
Listed working time 3–5 rainy days; light-sensor configuration
Construction & installation
SpecificationSolar
Material Die-cast aluminium + PC lens
Colour Black; other colours can be customised
Protection IP65
Fixture dimensions Ø185mm head / Ø105mm base / H225mm
Installation distance 2–4m
Solar base fixings 3 expansion screws
Net weight 0.73kg (reference)
Operating conditions & component data
SpecificationSolar
Operating temperature −25°C to 50°C
Working humidity 10%–90%
Solar start-up Approximately 3 seconds; switch on in darkness
LED-chip lifespan (listed) 80,000–100,000 hours
Battery cycle life (listed) More than 2,000 charge/discharge cycles
PC cover transmittance (listed) Up to 90%
Construction

Rounded ribbed shade and a round fixing base.

Rounded ribbed shade

The rounded clear shade has deep vertical ribs beneath its circular cap.

Round solar cap

The cell area sits inside the circular top frame of the solar head.

Round pedestal base

The underside of the circular base has fixing openings around the pedestal connection.

Illuminated rounded shade

Vertical ribs remain visible across the illuminated rounded shade above the short pedestal.

Installation

Check the pillar top. Match the fixing base.

The head spans Ø185mm and the base spans Ø105mm. The full lamp height is 225mm. Check these sizes against the top of your post or wall.

Recommended installation spacing: 2–4m between lamps. Use this as a starting point when planning the site. Check the final layout against the light levels you need.

Choose the power version and order colour temperature.

Check the base, pillar-top surface and the supplied fixing arrangement.

Use the illustrated 3-screw arrangement for the solar fixture. Review sunlight at the final position.

Packing

Packing and branding

Use the solar packing data below to plan sample and bulk orders. Check final packing when placing the order. Weights are for reference.

Explore OEM options →

Solar packing record

PackingInner boxOuter carton
Units 1 10
Carton size 200 × 185 × 180mm 940 × 415 × 200mm
Net weight (reference) 0.73kg 7.3kg
Gross weight (reference) 0.93kg 10.15kg
FAQ

Questions about ZTD0705.

Which power versions can I request?

The solar model has a top panel and a built-in battery. The panel is rated at 2W / 5V. The LiFePO4 battery is rated at 3.2V / 3000mAh. Check sunlight at the top of the post. For the solar multicolour option, confirm the available colours and controls when enquiring.

Which panel and battery are specified?

The solar model pairs a 2W / 5V monocrystalline panel with a 3.2V / 3000mAh LiFePO4 battery.

Which colour temperatures can I choose?

The stated range is 3000K–6500K, with illustrations at 3000K warm white and 6500K white light. Include the order option in the enquiry.

How does the pillar light mount?

The solar fixture uses a fixed base with 3 expansion screws in the component detail. Check the pillar surface, base dimensions and fixing positions before installation.

How do I start the solar version?

The light-sensor model lists 3–5 rainy days of use. No nightly hour figure is given. Switch the lamp on in the dark, then wait about 3 seconds for it to light up.

Can I request a different housing colour?

Black is listed in the specification. Other colours can be customised; state the preferred finish with the model and quantity.

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

ZTD0705 Product preview 6000K cool white
Reply contact

Enter at least one way for us to reply.

Product options

ZTD0705

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
6000K cool whiteEnquire →