A clear-bowl head.
The inner white light form remains visible within the outer shade.
CPD3006 is a solar bollard with a clear PC bowl surrounding a central white light element. A circular cap, die-cast aluminium round post and fixed foot create a rounded fixture for villa gardens and courtyard paths.
Black; other colours can be customised
The outer bowl leaves the central white element visible, giving this head a different visual treatment from a solid diffuser. Choose the body option for the garden edge while repeating the same clear-bowl form through the landscape.
The inner white light form remains visible within the outer shade.
The cap, bowl and cylindrical post give the design a consistent curved form.
Specify the body proportion and matching reference weight for the garden edge.
Share your model, installation site and quantity with our team.
Request a quoteChoose the required body size with the clear-bowl head, then state the colour-temperature appearance for the order.
Solar operation and controls The listed solar working-time record is 3–5 rainy days (no hourly duration stated). Review charging conditions at the intended panel position when planning operation. The waterproof push-button is identified in the component detail. Switch on in darkness and allow approximately 3 seconds for automatic illumination.
Electrical, construction and component records for CPD3006.
CPD3006 English specification ↓ (PDF · 4.3 MB)LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.
| Specification | Solar |
|---|---|
| Solar panel | Monocrystalline, 4.5W / 5V |
| Battery | 3.2V / 6000mAh |
| LED source | 2835 LED |
| LED quantity | 40 pcs |
| Rated power | 4.5W |
| Input voltage | DC3.2V |
| Luminous flux | 232 / 269 lm (3000K / 6500K) |
| CRI | CRI ≥ 80 |
| Beam angle | 180° |
| Colour temperature | 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white |
| Listed working time | 3–5 rainy days (no hourly duration stated) |
| Battery chemistry | LiFePO4 |
| Specification | Solar |
|---|---|
| Material | Die-cast aluminium + PC |
| Size | Φ235 × 150 × H650/850mm |
| Net weight | 650mm: 2.25kg; 850mm: 2.65kg |
| Colour | Black; other colours can be customised |
| Protection | IP65 |
| PC optical-cover transmittance (listed) | Up to 90% |
| Solar fixing detail | 3 expansion screws |
| Specification | Solar |
|---|---|
| Operating temperature | −25°C to 50°C |
| Working humidity | 10%–90% |
| LED-chip lifespan (listed) | 80,000–100,000 hours |
| Battery cycle life (listed) | More than 2,000 charge/discharge cycles |
| Start-up wait (listed) | Approximately 3 seconds; illumination only in darkness |
Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.
The transparent-looking outer PC surface surrounds the inner white element beneath the panel cap. The head close-up explains the two visible forms; the full view retains the rounded cap-and-post outline.
The solar assembly combines Monocrystalline, 4.5W / 5V with a 3.2V / 6000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Identify the waterproof push-button before following the solar activation instructions.
The post supports the bowl assembly above the round fixing foot. The waterproof switch is shown on the body, with the selected body height and its own weight recorded in the specification.
Review the complete fixture dimensions and its mounting interface.
Review the complete body dimension separately from the head and base measurements. The source’s expansion-screw fixing detail identifies the mounting method for this round-post bollard.
Listed fixture dimensions: Φ235 × 150 × H650/850mm.
| Configuration | Packing | Units | Carton size | Gross weight, reference |
|---|---|---|---|---|
| 650mm | Outer carton | 4 | 570 × 570 × 730mm | 13.7kg |
| 850mm | Outer carton | 4 | 570 × 570 × 930mm | 14.75kg |
Black; other colours can be customised
This specification covers the solar 4.5W assembly. Its panel and built-in battery are listed below.
The solar assembly lists Monocrystalline, 4.5W / 5V and a 3.2V / 6000mAh LiFePO4 battery. A visible central diffuser within the clear bowl.
The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.
The solar assembly detail specifies 3 expansion screws. Use the model’s illustrated fixing arrangement.
The listed solar working-time record is 3–5 rainy days (no hourly duration stated). See Configuration for the complete control instructions.
State the clear-bowl bollard size and light colour, with the quantity required for the matching packing arrangement.
Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.