A projecting crescent head.
A separate underside module gives the path bollard its distinctive profile.
CPD3005 is a solar path bollard with a projecting crescent-inspired head and a separate underside LED module. The die-cast aluminium body supports PIR motion, constant-light and off selections for planted paths and courtyard routes.
Black; other colours can be customised
The projecting head gives this bollard a defined front-and-side profile beside a path. Choose the body size for the planting edge and review whether the documented motion or constant-light mode fits the intended operating pattern.
A separate underside module gives the path bollard its distinctive profile.
PIR motion, constant lighting and off are recorded for this model.
Use the underside detail when planning the motion-mode arrangement.
Share your model, installation site and quantity with our team.
Request a quoteSpecify the body size and choose between PIR motion mode and constant lighting; the switch also provides off.
Solar operation and controls The listed solar working-time record is 3–5 rainy days (no hourly duration stated). Review charging conditions at the intended panel position when planning operation. Select PIR mode, constant mode or off using the illustrated three-position control. PIR mode / constant mode / off; source diagram: 2m sensing area, 20% standby / 100% triggered.
Electrical, construction and component records for CPD3005.
CPD3005 English specification ↓ (PDF · 6.7 MB)LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.
| Specification | Solar |
|---|---|
| Solar panel | Monocrystalline, 5W / 5V |
| Battery | 3.2V / 8000mAh |
| LED source | 3030 LED |
| LED quantity | 8 pcs |
| Rated power | 5W |
| Input voltage | DC3.2V |
| Luminous flux | 232 / 269 lm (3000K / 6500K) |
| CRI | CRI ≥ 80 |
| Beam angle | 120° |
| Colour temperature | 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white |
| Listed working time | 3–5 rainy days (no hourly duration stated) |
| Control | PIR mode / constant mode / off; source diagram: 2m sensing area, 20% standby / 100% triggered |
| Battery chemistry | LiFePO4 |
| Specification | Solar |
|---|---|
| Material | Die-cast aluminium + lens |
| Size | 240 × 200 × H600/800/1000mm |
| Net weight | 600mm: 2.31kg; 800mm: 2.82kg; 1000mm: 3.2kg |
| Colour | Black; other colours can be customised |
| Protection | IP65 |
| PC optical-cover transmittance (listed) | Up to 90% |
| Optical lens | PC optical lens |
| Specification | Solar |
|---|---|
| Operating temperature | −25°C to 50°C |
| Working humidity | 10%–90% |
| LED-chip lifespan (listed) | 80,000–100,000 hours |
| Battery cycle life (listed) | More than 2,000 charge/discharge cycles |
Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.
The underside module sits below the overhanging solar cap rather than within a large glowing shade. A side view explains the projection, while the underside view locates the lens and motion sensor.
The solar assembly combines Monocrystalline, 5W / 5V with a 3.2V / 8000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Select PIR, constant-light or off with the illustrated three-position control.
The PC transparent-lens detail and the sensor view identify the optical and control parts without changing the body’s mounting arrangement.
Review the complete fixture dimensions and its mounting interface.
Plan the fixed base from the product drawing, then review the documented sensing area when selecting motion mode. The sensing dimension describes the control illustration, not a guaranteed illuminated distance.
Listed fixture dimensions: 240 × 200 × H600/800/1000mm.
| Configuration | Packing | Units | Carton size | Gross weight, reference |
|---|---|---|---|---|
| 600mm | Outer carton | 4 | 520 × 440 × 670mm | 10.25kg |
| 800mm | Outer carton | 4 | 520 × 440 × 870mm | 14.32kg |
| 1000mm | Outer carton | 4 | 520 × 440 × 1070mm | 16.2kg |
Black; other colours can be customised
This specification covers the solar 5W assembly. Its panel and built-in battery are listed below.
The solar assembly lists Monocrystalline, 5W / 5V and a 3.2V / 8000mAh LiFePO4 battery. A crescent-like projection above the LED module.
The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.
Review the base plate and body assembly in the mounting illustration before positioning the fixture.
The listed solar working-time record is 3–5 rainy days (no hourly duration stated). See Configuration for the complete control instructions.
Include body size, colour temperature and preferred PIR or constant-light mode, plus quantity by size for final packing.
Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.