A four-leaf crown.
The low clover-shaped head adds a defined outline to modern planting schemes.
CPD2804 places a low four-leaf-clover-inspired head above a square die-cast aluminium post. PC optical sections sit beneath the crown, creating a solar bollard for geometric courtyard layouts and planted garden edges.
Black; other colours can be customised
The head’s leaf-like outline gives the fixture a decorative shape without a large projecting diffuser. Choose among the four body sizes to repeat this low crown alongside modern paving, courtyard beds and straight planting lines.
The low clover-shaped head adds a defined outline to modern planting schemes.
Separate PC light windows are part of the visible head design.
Repeat the same crown through different parts of the garden layout.
Share your model, installation site and quantity with our team.
Request a quoteSelect one of the four body sizes while retaining the clover crown, then state the required light colour and housing finish.
Solar operation and controls The listed solar working-time record is 3–5 rainy days (no hourly duration stated). Review charging conditions at the intended panel position when planning operation. The waterproof push-button is identified in the component detail. Switch on in darkness and allow approximately 3 seconds for automatic illumination.
Electrical, construction and component records for CPD2804.
CPD2804 English specification ↓ (PDF · 5.2 MB)LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.
| Specification | Solar |
|---|---|
| Solar panel | Monocrystalline, 5W / 5V |
| Battery | 3.2V / 6000mAh |
| LED source | 2835 LED |
| LED quantity | 40 pcs |
| Rated power | 5W |
| Input voltage | DC3.2V |
| Luminous flux | 322.62 / 365.47 lm (3000K / 6500K) |
| CRI | CRI ≥ 80 |
| Beam angle | 180° |
| Colour temperature | 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white |
| Listed working time | 3–5 rainy days (no hourly duration stated) |
| Battery chemistry | LiFePO4 |
| Specification | Solar |
|---|---|
| Material | Die-cast aluminium + PC |
| Size | 235mm head / 140mm base; H400/600/800/1000mm |
| Net weight | 400mm: 1.92kg; 600mm: 2.14kg; 800mm: 2.37kg; 1000mm: 2.59kg |
| Colour | Black; other colours can be customised |
| Protection | IP65 |
| PC optical-cover transmittance (listed) | Up to 90% |
| Solar fixing detail | 4 expansion screws |
| Specification | Solar |
|---|---|
| Operating temperature | −25°C to 50°C |
| Working humidity | 10%–90% |
| LED-chip lifespan (listed) | 80,000–100,000 hours |
| Battery cycle life (listed) | More than 2,000 charge/discharge cycles |
| Start-up wait (listed) | Approximately 3 seconds; illumination only in darkness |
Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.
The underside view shows separate PC light areas around the head. The shallow clover outline and the square post work together as the fixture’s design, so both the underside and full-product views are useful when selecting it.
The solar assembly combines Monocrystalline, 5W / 5V with a 3.2V / 6000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Identify the waterproof push-button before following the solar activation instructions.
The structural post follows the head’s geometric language down to a square base. Its fixing detail identifies expansion-screw installation; the body-size option determines the overall product proportion.
Review the complete fixture dimensions and its mounting interface.
The drawing identifies the head and foot separately from the four body heights. Use the selected complete body record and inspect the fixed-base detail before planning the fixing location.
Listed fixture dimensions: 235mm head / 140mm base; H400/600/800/1000mm.
| Configuration | Packing | Units | Carton size | Net weight, reference | Gross weight, reference |
|---|---|---|---|---|---|
| 400mm | Outer carton | 4 | 500 × 500 × 270mm | 7.68kg | 9.24kg |
| 600mm | Outer carton | 4 | 500 × 500 × 270mm | 8.76kg | 12.4kg |
| 800mm | Outer carton | 4 | 1000 × 260 × 270mm | 9.56kg | 13.8kg |
| 1000mm | Outer carton | 4 | 1000 × 260 × 270mm | 10.6kg | 15.2kg |
Black; other colours can be customised
This specification covers the solar 5W assembly. Its panel and built-in battery are listed below.
The solar assembly lists Monocrystalline, 5W / 5V and a 3.2V / 6000mAh LiFePO4 battery. Leaf-like optical windows beneath the crown.
The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.
The solar assembly detail specifies 4 expansion screws. Use the model’s illustrated fixing arrangement.
The listed solar working-time record is 3–5 rainy days (no hourly duration stated). See Configuration for the complete control instructions.
Specify the clover bollard body size, light colour and preferred finish, with quantities separated by size.
Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.