Lawn Lights · YMG

CPD2104

Heart-Inspired Solar Bollard

CPD2104 is a solar bollard with a broad cap and narrowing double-layer PC shade inspired by a heart-like outline. A die-cast aluminium cylindrical post and round fixed foot carry this shaped crown beside villa planting and courtyard paths.

Solar 4.5WIP653000K–6500K
CPD2104 · Solar 4.5W · 3000K warm white

Enquire about this model CPD2104 English specification ↓ (PDF · 15.7 MB)

Black; other colours can be customised

Overview

A shaped crown repeated through courtyard planting.

The broad upper head and narrowed lower shade create the heart-inspired decorative crown. Select the shorter or taller body to relate the same crown to the planted edge and the surrounding garden composition.

A broad tapered crown.

The shaped double-layer shade gives the bollard its heart-inspired identity.

Round-base construction.

A cylindrical post and fixing foot suit the fixed-base arrangement.

Protected activation detail.

The hexagonal accessory operates the protected waterproof switch.

Explore CPD2104 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Select the complete fixed-base body size and the required colour temperature while retaining the same broad heart-inspired shade.

Power version

Power version

Light colour

Light colour
Your selected configuration CPD2104 · Solar 4.5W · 3000K warm white

Solar operation and controls The listed solar working-time record is 3–5 rainy days (no hourly duration stated). Review charging conditions at the intended panel position when planning operation. The protected waterproof switch is operated with the hexagonal accessory shown in the detail page. The lamp illuminates only in darkness; allow approximately 3 seconds after activation.

Specifications

Technical specifications

Electrical, construction and component records for CPD2104.

CPD2104 English specification ↓ (PDF · 15.7 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolar
Solar panel Monocrystalline, 4.5W / 5V
Battery 3.2V / 8000mAh
LED source 2835 LED
LED quantity 30 pcs
Rated power 4.5W
Input voltage DC3.2V
Luminous flux 288.54 / 266.26 lm (3000K / 6500K)
CRI CRI ≥ 80
Beam angle 180°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Listed working time 3–5 rainy days (no hourly duration stated)
Battery chemistry LiFePO4
Construction & installation
SpecificationSolar
Material Die-cast aluminium + PC
Size 260 × 120 × H500/750mm
Net weight 500mm: 2kg; 750mm: 2.35kg
Colour Black; other colours can be customised
Protection IP65
PC optical-cover transmittance (listed) Up to 90%
Solar fixing detail 3 expansion screws
Operating conditions & component data
SpecificationSolar
Operating temperature −25°C to 50°C
Working humidity 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours
Battery cycle life (listed) More than 2,000 charge/discharge cycles
Start-up wait (confirmed) Approximately 3 seconds; illumination only in darkness
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

A broad upper shade narrowing towards the post.

The heart-inspired form is expressed through the head’s taper and double-layer PC shade. A close-up shows the shape below the circular cap, while the whole-product view explains the round post beneath it.

Solar components and protected switch access.

The solar assembly combines Monocrystalline, 4.5W / 5V with a 3.2V / 8000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. The hexagonal accessory operates the protected switch; activate the lamp in darkness and allow approximately 3 seconds.

Double-layer PC above an aluminium bollard.

The double-layer PC shade sits above an aluminium body with a circular fixing foot. Its protected switch is operated with the hexagonal accessory shown in the detail page.

Installation

Check the round foot and protected switch.

Review the complete fixture dimensions and its mounting interface.

Use the body drawing for size selection and the base detail for expansion-screw fixing. Identify the protected switch before commissioning, following the accessory-based activation described for this model.

Listed fixture dimensions: 260 × 120 × H500/750mm.

Packing

Body-specific cartons for the shaped bollard.

ConfigurationPackingUnitsCarton sizeGross weight, reference
500mm Outer carton 4 580 × 580 × 340mm 10.6kg
750mm Outer carton 4 680 × 590 × 340mm 12.6kg

Housing colour

Black; other colours can be customised

FAQ

Questions about CPD2104.

Is this model solar or mains-powered?

This specification covers the solar 4.5W assembly. Its panel and built-in battery are listed below.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 4.5W / 5V and a 3.2V / 8000mAh LiFePO4 battery. A broad upper shade narrowing towards the post.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 3 expansion screws. Use the model’s illustrated fixing arrangement.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 3–5 rainy days (no hourly duration stated). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include the heart-inspired bollard size, required light colour and finish, and request the protected-switch instructions with the order.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

CPD2104 Product preview CPD2104 · Solar 4.5W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

CPD2104

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
CPD2104 · Solar 4.5W · 3000K warm whiteEnquire →