Lawn Lights · YMG

CPD1004

Jasmine Solar Bollard

CPD1004 combines a broad circular solar cap with a smooth, narrowing PC shade inspired by a jasmine form. Its die-cast aluminium post and circular mounting foot provide a fixed-base garden bollard for courtyard borders and residential planting.

Solar 4.5WIP653000K–6500K
CPD1004 · Solar 4.5W · 3000K warm white

Enquire about this model CPD1004 English specification ↓ (PDF · 5.7 MB)

Black; other colours can be customised

Overview

A flower-inspired outline beside courtyard planting.

The cap spreads beyond the smooth white shade, so the head reads as a flower-like crown in daylight as well as a light fixture. Choose the body proportion for the garden edge and keep that round profile consistent through the courtyard layout.

A smooth jasmine crown.

A wide cap and narrowing diffuser give courtyard planting a flower-inspired fixture outline.

Round fixed-base construction.

The cylindrical support and circular foot define the mounting arrangement.

Size-specific order details.

Select the required body option and use its own dimensions and reference weight.

Explore CPD1004 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Choose the bollard body size and its corresponding weight record; the jasmine crown and the listed solar configuration remain the same.

Power version

Power version

Light colour

Light colour
Your selected configuration CPD1004 · Solar 4.5W · 3000K warm white

Solar operation and controls The listed solar working-time record is 3–5 rainy days (no hourly duration stated). Review charging conditions at the intended panel position when planning operation. The waterproof push-button is identified in the component detail. Switch on in darkness and allow approximately 3 seconds for automatic illumination.

Specifications

Technical specifications

Electrical, construction and component records for CPD1004.

CPD1004 English specification ↓ (PDF · 5.7 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolar
Solar panel Monocrystalline, 4.5W / 5V
Battery 3.2V / 8000mAh
LED source 8mm Straw Hat LED
LED quantity 12 pcs
Rated power 4.5W
Input voltage DC3.2V
Luminous flux 210.97 / 229 lm (3000K / 6500K)
CRI CRI ≥ 80
Beam angle 180°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Listed working time 3–5 rainy days (no hourly duration stated)
Battery chemistry LiFePO4
Construction & installation
SpecificationSolar
Material Die-cast aluminium + PC
Size Φ260 × 120 × H450/700mm
Net weight 450mm: 1.9kg; 700mm: 2.18kg
Colour Black; other colours can be customised
Protection IP65
PC optical-cover transmittance (listed) Up to 90%
Solar fixing detail 3 expansion screws
Operating conditions & component data
SpecificationSolar
Operating temperature −25°C to 50°C
Working humidity 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours
Battery cycle life (listed) More than 2,000 charge/discharge cycles
Start-up wait (listed) Approximately 3 seconds; illumination only in darkness
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

A broad cap with a smooth narrowing diffuser.

The circular top narrows through the white PC shade into the post. Unlike a faceted or ribbed shade, its visual emphasis is the continuous cap-to-diffuser curve.

A top-mounted panel. A waterproof push-button.

The solar assembly combines Monocrystalline, 4.5W / 5V with a 3.2V / 8000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Identify the waterproof push-button before following the solar activation instructions.

A circular foot below the aluminium post.

The base close-up identifies the fixed mounting foot. The source describes expansion-screw fixing for this assembly; the listed die-cast aluminium body and PC shade should be considered separately from the selected body size.

Installation

Select the body. Inspect the mounting foot.

Review the complete fixture dimensions and its mounting interface.

The two body options use a round fixed-base arrangement. Check the selected product drawing and the base fixing detail before specifying the bollard for a paved garden edge.

Listed fixture dimensions: Φ260 × 120 × H450/700mm.

Packing

Packing differs with the selected bollard size.

ConfigurationPackingUnitsCarton sizeNet weight, referenceGross weight, reference
450mm Inner box 1 270 × 270 × 280mm 1.9kg 2.2kg
450mm Outer carton 4 570 × 570 × 310mm 7.8kg 9.36kg
700mm Inner box 1 270 × 270 × 280mm 2.18kg 2.6kg
700mm Outer carton 4 670 × 580 × 310mm 9.7kg 10.93kg

Housing colour

Black; other colours can be customised

FAQ

Questions about CPD1004.

Is this model solar or mains-powered?

This specification covers the solar 4.5W assembly. Its panel and built-in battery are listed below.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 4.5W / 5V and a 3.2V / 8000mAh LiFePO4 battery. A broad cap with a smooth narrowing diffuser.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 3 expansion screws. Use the model’s illustrated fixing arrangement.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 3–5 rainy days (no hourly duration stated). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include the jasmine bollard size, colour-temperature option and housing finish, and request the matching final packing record.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

CPD1004 Product preview CPD1004 · Solar 4.5W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

CPD1004

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
CPD1004 · Solar 4.5W · 3000K warm whiteEnquire →