A recognisable diamond profile.
A tapered shade with vertical facets gives the fixture its own identity within a garden scheme.
CPD0804 is a solar lawn light with a tapered PC shade, a die-cast aluminium body and a pointed ground stake. Its diamond-inspired head gives garden borders a distinct profile, with two assembly sizes for villa gardens, courtyards and planted outdoor spaces.
Solar configuration. Black housing; other colours can be customised.
Use CPD0804 where the lamp itself forms part of the landscape composition: beside planted paths, around courtyard planting or within a villa garden. Its faceted, tapered shade adds a recognisable fixture shape to these planting-focused arrangements.
A tapered shade with vertical facets gives the fixture its own identity within a garden scheme.
Specify the 500mm or 700mm overall assembly to suit your planned planting layout.
The pointed aluminium stake is designed for insertion into soil at the selected position.
Review the assembly drawing when choosing the body size, and consider the sunlight available at the intended solar-panel position. The two sizes share the same diamond-inspired head and ground-stake format.
Share your model, installation site and quantity with our team.
Request a quoteReview the solar configuration, specify the assembly size, then select the colour-temperature option for your enquiry.
Solar operation and switch instructions The light-sensor configuration lists 3–5 rainy days of operation. The specification does not state a nightly hour figure; charging conditions at the installation position should be considered when planning solar operation. The detail page identifies a waterproof push-button switch. After switching on, allow approximately 3 seconds for the lamp to illuminate automatically; the specification notes that it turns on only in darkness.
Review electrical, optical, construction and operating data for CPD0804. Packing data is listed separately below.
CPD0804 English specification ↓ (PDF · 6.7 MB)LED-chip lifespan and battery-cycle figures refer to the listed components, not a whole-luminaire warranty. Net and gross weights are reference values.
| Specification | Solar |
|---|---|
| Solar panel | Monocrystalline, 2W / 5V |
| Battery | 3.2V / 3000mAh |
| LED source | 2835 LED |
| LED quantity | 20 pcs |
| Rated power | 2W |
| Input voltage | DC3.2V |
| Luminous flux | 115 / 108 lm (3000K / 6500K) |
| CRI | CRI ≥ 80 |
| Colour temperature | 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white |
| Listed working time | 3–5 rainy days (no hourly duration stated) |
| Beam angle | 180° |
| Battery chemistry | LiFePO4 |
| Specification | Solar |
|---|---|
| Material | Die-cast aluminium + PC lens |
| Size | Φ185 × H500/700mm; drawing: 340/540mm above 160mm stake |
| Net weight | 0.79kg |
| Colour | Black; other colours can be customised |
| Protection | IP65 |
| Specification | Solar |
|---|---|
| Operating temperature | −25°C to 50°C |
| Working humidity | 10%–90% |
| LED-chip lifespan (listed) | 80,000–100,000 hours |
| Battery cycle life (listed) | More than 2,000 charge/discharge cycles |
| Start-up wait (listed) | Approximately 3 seconds; illumination only in darkness |
CPD0804 is specified here with a 180° beam angle. Review this optical parameter alongside the proposed planting arrangement; the assembly dimensions describe the fixture, not a guaranteed illuminated distance.
Vertical facets run through the translucent PC shade beneath the circular cap. The head narrows towards the post, giving CPD0804 its diamond-inspired outline and distinguishing its form from a plain cylindrical lawn light.
The circular top carries a 2W / 5V monocrystalline solar panel, paired with a built-in 3.2V / 3000mAh LiFePO4 battery. The source lists more than 2,000 charge and discharge cycles for the battery component. The waterproof push-button sits beside the lens. This is the control to identify before following the dark-start instructions above.
The material specification combines a die-cast aluminium body with a PC lens, with an IP65 protection rating for the luminaire. The pointed aluminium stake continues the narrow profile below the body and is the part inserted into soil.
Compare the complete assembly with the above-stake dimensions before selecting the required size.
Both assemblies have a head diameter of 185mm and a 160mm stake. The shorter version combines a 340mm above-stake body with the stake for an overall 500mm assembly; the longer version combines a 540mm body with the stake for an overall 700mm assembly.
The English specification lists individual inner-box packing and a separate outer carton. Use the packing record below when discussing samples, order quantities and shipment preparation.
These are the specification’s reference packing values. Confirm the final packing for the selected 500mm or 700mm assembly; the packing table does not identify a separate carton size for each assembly option.
| Packing item | Inner box | Outer carton |
|---|---|---|
| Units | 1 | 10 |
| Carton size | 200 × 185 × 180mm | 940 × 415 × 200mm |
| Net weight, for reference | 0.79kg | 7.9kg |
| Gross weight, for reference | 0.95kg | 10.8kg |
Black is the listed housing colour. Other colours can be customised; include your preferred finish with the model, assembly size and colour temperature when discussing the order.
The specification lists a 2W solar lawn-light configuration with a top-mounted panel and a built-in battery. The electrical data on this page refers to that solar configuration.
A 2W / 5V monocrystalline panel is paired with a 3.2V / 3000mAh battery. The component detail identifies the battery as LiFePO4.
The parameter range is 3000K–6500K, with illustrated examples at 3000K warm white and 6500K white light. State the required order option; the illustrations do not indicate colour changing after installation.
Choose a 500mm or 700mm overall assembly, with a 185mm head diameter. Each includes a 160mm ground stake; the body above the stake is 340mm or 540mm respectively. The pointed stake is intended for insertion into soil.
The specification describes a waterproof push-button and an approximately 3-second wait after switching on, with illumination only in darkness. It lists 3–5 rainy days for the light-sensor configuration but does not give a nightly hour figure.
Yes. Black is the standard listed colour, and other colours can be customised. Include the preferred colour, assembly size and colour-temperature option with the order enquiry.
Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.