Garden Lights · YMG

TYD4208

Square Crane Solar Garden Light

TYD4208 is a square-crown solar garden light with a curved crane-inspired support and a rectangular underside optical module. Its die-cast aluminium and tempered-glass assembly has separate PWM and MPPT luminous-flux records to review when choosing the solar configuration.

Solar 62WIP653000K–6500K
TYD4208 · Solar 62W · 3000K warm white

Enquire about this model TYD4208 English specification ↓ (PDF · 7.3 MB)

Black; other colours can be customised

Overview

Select the controller record with the square crown.

The square cap and swept support form the fixture’s daytime identity in a courtyard or landscaped route. Specify the controller with the light colour so that the selected configuration follows its own output record rather than a combined headline figure.

A square crane silhouette.

The straight crown and curved support define this model’s exterior.

Controller-labelled output.

PWM and MPPT values remain separate for each illustrated colour temperature.

A rectangular underside module.

The optical close-up explains the assembly below the square cap.

Explore TYD4208 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Choose PWM or MPPT with the required colour temperature, then confirm finish and the planned pole connection.

Power version

Power version

Light colour

Light colour
Your selected configuration TYD4208 · Solar 62W · 3000K warm white

Solar operation and controls The listed solar working-time record is 12 hours (3–5 rainy days). Review charging conditions at the intended panel position when planning operation. For the solar assembly, operate the waterproof push-button in darkness and allow approximately 10 seconds for automatic illumination. Controller indicators: steady red means normal controller power; steady blue identifies real-time mode. Steady green indicates solar input below the charging start threshold. A fast green flash (0.25 seconds on / 0.25 seconds off) indicates full charge with overcharge protection. Select PWM or MPPT together with the light colour: PWM: 4918lm at 3000K / 5106lm at 6500K; MPPT: 5580lm at 3000K / 5740lm at 6500K.

Specifications

Technical specifications

Electrical, construction and component records for TYD4208.

TYD4208 English specification ↓ (PDF · 7.3 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolar
Solar panel Monocrystalline, 62W / 5V
Battery 3.2V / 100000mAh
LED source 5054 chip
LED quantity 100 pcs
Rated power 62W
Input voltage DC3.2V
Luminous flux PWM: 4918lm at 3000K / 5106lm at 6500K; MPPT: 5580lm at 3000K / 5740lm at 6500K
CRI CRI ≥ 80
Beam angle 120°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Listed working time 12 hours (3–5 rainy days)
Battery chemistry LiFePO4
Construction & installation
SpecificationSolar
Material Die-cast aluminium + tempered glass
Lamp-head size 590 × 590 × H505mm
Installation diameter Inner diameter: Ø76mm; outer diameter: Ø78mm
Installation height 2.5–6m
Colour Black; other colours can be customised
Protection IP65
Optical lens PC optical lens; tempered glass is separately listed in the material table
PC optical-cover transmittance (listed) Up to 90%
Solar fixing detail 3 hexagonal screws
Net weight 12kg
Gross weight, packed 13.8kg
Operating conditions & component data
SpecificationSolar
Operating temperature −25°C to 50°C
Working humidity 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours
Battery cycle life (listed) More than 2,000 charge/discharge cycles
Solar start-up wait (listed) Approximately 10 seconds; illumination only in darkness
Solar controller indicators Red steady: normal power; blue steady: real-time mode; green steady: solar input below charging start threshold; green fast flash: full charge / overcharge protection (0.25s on / 0.25s off)
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

A square cap and a rectangular optical module.

The straight-edged crown contrasts with the curved neck below it. The underside image shows the rectangular light section; the side view explains the offset crane-inspired support.

Solar power and controller-status indicators.

The solar assembly combines Monocrystalline, 62W / 5V with a 3.2V / 100000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. The Solar assembly has a waterproof push-button and red, blue and green controller indicators.

A curved aluminium support beneath a square head.

The material table identifies die-cast aluminium and tempered glass, while the component detail separately names the PC optical lens. The connector close-up belongs with the pole-interface record, not the overall head-width measurement.

Installation

Read the square head dimensions and connector together.

Review the complete fixture dimensions and its mounting interface.

Check width, depth and head height independently of the pole. Use the curved-support drawing and this model’s fixing illustration when planning the solar head arrangement.

Listed fixture dimensions: 590 × 590 × H505mm.

The recommended garden-light installation height is 2.5–6m. Match the pole connection to the listed inner diameter of Ø76mm and outer diameter of Ø78mm.

Packing

Carton dimensions for the square solar head.

ConfigurationPackingUnitsCarton sizeNet weight, referenceGross weight, reference
Solar Outer carton 1 650 × 165 × 760mm 12kg 13.8kg

Housing colour

Black; other colours can be customised

FAQ

Questions about TYD4208.

Is this model solar or mains-powered?

This specification covers the solar 62W assembly. Its panel and built-in battery are listed below.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 62W / 5V and a 3.2V / 100000mAh LiFePO4 battery. A square cap and a rectangular optical module.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 3 hexagonal screws. Use the model’s illustrated fixing arrangement.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 12 hours (3–5 rainy days). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include PWM or MPPT, colour temperature, finish, pole-interface requirements and quantity.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

TYD4208 Product preview TYD4208 · Solar 62W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

TYD4208

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
TYD4208 · Solar 62W · 3000K warm whiteEnquire →