Garden Lights · YMG

TYD4206

Round Crane Solar Garden Light

TYD4206 combines a round solar crown with a curved crane-inspired mounting neck and an underside optical module. The garden-light assembly uses a die-cast aluminium body, tempered glass and a PC optical lens for landscaped paths and courtyard installations.

Solar 36WIP653000K–6500K
TYD4206 · Solar 36W · 3000K warm white

Enquire about this model TYD4206 English specification ↓ (PDF · 5.1 MB)

Black; other colours can be customised

Overview

A curved-neck silhouette for solar garden schemes.

Choose the round crane-inspired head when a curved neck should be part of the pole-top design. Plan the solar-panel position for daylight exposure and use the head drawing to check its projection above the intended pole.

A round crane profile.

The swept neck gives the solar head an individual outline.

Visible controller indicators.

The detail page explains the controller’s red, blue and green status lights.

A separate optical lens.

The underside view identifies the PC lens within the glass-and-aluminium assembly.

Explore TYD4206 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Specify the solar configuration, colour temperature and finish, then match the head interface to the planned pole.

Power version

Power version

Light colour

Light colour
Your selected configuration TYD4206 · Solar 36W · 3000K warm white

Solar operation and controls The listed solar working-time record is 12 hours (3–5 rainy days). Review charging conditions at the intended panel position when planning operation. For the solar assembly, operate the waterproof push-button in darkness and allow approximately 10 seconds for automatic illumination. Controller indicators: steady red means normal controller power; steady blue identifies real-time mode. Steady green indicates solar input below the charging start threshold. A fast green flash (0.25 seconds on / 0.25 seconds off) indicates full charge with overcharge protection.

Specifications

Technical specifications

Electrical, construction and component records for TYD4206.

TYD4206 English specification ↓ (PDF · 5.1 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolar
Solar panel Monocrystalline, 36W / 5V
Battery 3.2V / 48000mAh
LED source 5054 chip
LED quantity 60 pcs
Rated power 36W
Input voltage DC3.2V
Luminous flux 2574.23 / 2836.6 lm (3000K / 6500K)
CRI CRI ≥ 80
Beam angle 120°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Listed working time 12 hours (3–5 rainy days)
Battery chemistry LiFePO4
Construction & installation
SpecificationSolar
Material Die-cast aluminium + tempered glass
Lamp-head size / reference weight 550 × H510mm / 8.5kg
Installation diameter Inner diameter: Ø76mm; outer diameter: Ø78mm
Installation height 2.5–6m
Colour Black; other colours can be customised
Protection IP65
Optical lens PC optical lens; tempered glass is separately listed in the material table
PC optical-cover transmittance (listed) Up to 90%
Solar fixing detail 6 hexagonal screws
Operating conditions & component data
SpecificationSolar
Operating temperature −25°C to 50°C
Working humidity 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours
Battery cycle life (listed) More than 2,000 charge/discharge cycles
Solar start-up wait (listed) Approximately 10 seconds; illumination only in darkness
Solar controller indicators Red steady: normal power; blue steady: real-time mode; green steady: solar input below charging start threshold; green fast flash: full charge / overcharge protection (0.25s on / 0.25s off)
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

A round crown above a curved support.

The circular head sits above the swept neck rather than directly over a straight central post. The underside close-up identifies the round optical module, while the side view explains the crane-like outline.

Solar power and controller-status indicators.

The solar assembly combines Monocrystalline, 36W / 5V with a 3.2V / 48000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. The Solar assembly has a waterproof push-button and red, blue and green controller indicators.

Glass, aluminium and a separate PC optical lens.

The material table lists die-cast aluminium and tempered glass. The detail page separately identifies the PC optical lens, so the glass entry should not be read as a description of every transparent component.

Installation

Allow for the curved neck in the head arrangement.

Review the complete fixture dimensions and its mounting interface.

Review the head diameter and height together with the curved support and connector. Use the model’s own fixing illustration for the solar assembly rather than a straight-neck garden-light instruction.

Listed fixture dimensions: 550 × H510mm / 8.5kg.

The recommended garden-light installation height is 2.5–6m. Match the pole connection to the listed inner diameter of Ø76mm and outer diameter of Ø78mm.

Packing

One solar head per listed carton.

ConfigurationPackingUnitsCarton sizeNet weight, referenceGross weight, reference
Solar Outer carton 1 600 × 165 × 740mm 8.5kg 10kg

Housing colour

Black; other colours can be customised

FAQ

Questions about TYD4206.

Is this model solar or mains-powered?

This specification covers the solar 36W assembly. Its panel and built-in battery are listed below.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 36W / 5V and a 3.2V / 48000mAh LiFePO4 battery. A round crown above a curved support.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 6 hexagonal screws. Use the model’s illustrated fixing arrangement.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 12 hours (3–5 rainy days). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include colour temperature, finish, pole-interface requirements and quantity for the round crane solar assembly.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

TYD4206 Product preview TYD4206 · Solar 36W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

TYD4206

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
TYD4206 · Solar 36W · 3000K warm whiteEnquire →