Garden Lights · YMG

TYD2806

Violet Garden Light

TYD2806 is a low-profile circular garden light with a violet-inspired, four-petal optical arrangement beneath its cap. The die-cast aluminium head and PC optical cover are offered with separate solar and AC configurations for courtyards, garden paths and landscaped residential areas.

Solar 36W / AC 50WIP653000K–6500K
TYD2806 · Solar 36W · 3000K warm white

Enquire about this model TYD2806 English specification ↓ (PDF · 4.5 MB)

Black; other colours can be customised

Overview

A broad, shallow head with detail underneath.

Use the low circular crown where the pole-top fixture should have a broad horizontal proportion. The four-petal underside provides the decorative identity at close range, while the solar or AC selection follows the site’s power arrangement.

A four-petal underside.

The violet-inspired optical arrangement gives the head its individual detail.

A broad, low profile.

The shallow crown has a different proportion from a deep lantern shade.

Separate power assemblies.

Solar and AC have their own electrical, output and packing records.

Explore TYD2806 details ↓

Review dimensions ↓

Planning your lighting project?

Share your model, installation site and quantity with our team.

Request a quote
Configuration

Choose the assembly. Then choose the light.

Select solar or AC power without changing the shallow crown and four-petal exterior design.

Power version

Power version

Light colour

Light colour
Your selected configuration TYD2806 · Solar 36W · 3000K warm white

Solar operation and controls The listed solar working-time record is 12 hours (3–5 rainy days). Review charging conditions at the intended panel position when planning operation. Solar runtime and battery figures do not describe the AC version. For the solar assembly, operate the waterproof push-button in darkness and allow approximately 10 seconds for automatic illumination.

Specifications

Technical specifications

Electrical, construction and component records for TYD2806.

TYD2806 English specification ↓ (PDF · 4.5 MB)

LED-chip lifespan and battery-cycle figures describe components, not a whole-luminaire warranty. Weights are reference figures.

Electrical & light output
SpecificationSolarAC
LED source 5054 SMD 3030 SMD
LED quantity 160 pcs 160 pcs
Rated power 36W 50W
Input voltage DC3.2V AC220–240V
Luminous flux 2658 / 2777 lm (3000K / 6500K) 6318 / 6428 lm (3000K / 6500K)
CRI CRI ≥ 80 CRI ≥ 80
Beam angle 180° 180°
Colour temperature 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white 3000K–6500K; illustrated endpoints: 3000K warm / 6500K white
Frequency — 50Hz
Solar panel Monocrystalline, 36W / 5V —
Battery 3.2V / 45000mAh —
Listed working time 12 hours (3–5 rainy days) —
Battery chemistry LiFePO4 —
Construction & installation
SpecificationSolarAC
Material Die-cast aluminium + PC lens Die-cast aluminium + PC lens
Net weight 7.69kg 5.35kg
Lamp-head size Φ585 × 78 × H215mm Φ585 × 78 × H215mm
Installation diameter Inner diameter: Ø76mm; outer diameter: Ø78mm Inner diameter: Ø76mm; outer diameter: Ø78mm
Installation height 2.5–6m 2.5–6m
Colour Black; other colours can be customised Black; other colours can be customised
Protection IP65 IP65
PC optical-cover transmittance (listed) Up to 90% —
Solar fixing detail 4 hexagonal screws —
Operating conditions & component data
SpecificationSolarAC
Operating temperature −25°C to 50°C −25°C to 50°C
Working humidity 10%–90% 10%–90%
LED-chip lifespan (listed) 80,000–100,000 hours —
Battery cycle life (listed) More than 2,000 charge/discharge cycles —
Solar start-up wait (listed) Approximately 10 seconds; illumination only in darkness —
Construction

Inspect the head. Understand the assembly.

Review the specified beam angle alongside the proposed layout. Fixture dimensions do not define a guaranteed illuminated distance.

Four petal-shaped sections below a shallow cap.

The underside photograph reveals the violet-inspired arrangement more clearly than the side silhouette. Read the close-up with the overall view: the petals belong to the optical assembly beneath the low circular crown.

A top-mounted panel. A waterproof push-button.

The solar assembly combines Monocrystalline, 36W / 5V with a 3.2V / 45000mAh LiFePO4 battery. The listed battery-cycle figure is more than 2,000 charge/discharge cycles. Identify the waterproof push-button before following the solar activation instructions.

A shallow aluminium head around a PC optical cover.

The central connector supports the low head. The aluminium body and PC optical cover have different roles within the assembly, with the underside detail identifying the petal-shaped light section.

Consult the original specification for the AC light-distribution curve and its corresponding electrical and luminous-flux record.

Installation

Check the wide head and its central connector.

Review the complete fixture dimensions and its mounting interface.

Use the diameter and shallow head-height dimensions when considering the fixture’s proportion above the pole. Match the central interface to the pole-top arrangement before confirming the order.

Listed fixture dimensions: Φ585 × 78 × H215mm.

The recommended garden-light installation height is 2.5–6m. Match the pole connection to the listed inner diameter of Ø76mm and outer diameter of Ø78mm.

Packing

Version-specific packing records for the shallow crown.

ConfigurationPackingUnitsCarton sizeNet weight, referenceGross weight, reference
Solar Outer carton 1 595 × 595 × 240mm 7.69kg 8.86kg
AC Outer carton 1 595 × 595 × 240mm 5.35kg 6.53kg

Housing colour

Black; other colours can be customised

FAQ

Questions about TYD2806.

Is this model solar or mains-powered?

Both are listed as separate assemblies: solar 36W and AC 50W. Select the required supply before comparing output and weight.

What makes this head and component assembly different?

The solar assembly lists Monocrystalline, 36W / 5V and a 3.2V / 45000mAh LiFePO4 battery. Four petal-shaped sections below a shallow cap.

Construction ↑

Which light-colour options can I specify?

The illustrated options are 3000K warm white and 6500K white light. Include the required colour temperature with the assembly in your enquiry.

How do I choose the size and mounting arrangement?

The solar assembly detail specifies 4 hexagonal screws. Use the model’s illustrated fixing arrangement. Confirm the supplied fixing arrangement for the AC assembly separately.

Installation ↑

How does the solar assembly operate?

The listed solar working-time record is 12 hours (3–5 rainy days). See Configuration for the complete control instructions.

Construction ↑

Can the housing finish be customised?

Include the required power assembly, colour temperature, finish and quantity, together with the pole-interface requirement.

Packing ↑

Tell us about your lighting project

Tell us where you plan to use the lights and what you need. Our sales team can help with a quote, a sample or product documents.

TYD2806 Product preview TYD2806 · Solar 36W · 3000K warm white
Reply contact

Enter at least one way for us to reply.

Product options

TYD2806

Add purchase details

YMG will use these details to reply to your enquiry. Privacy notice

solarlight@yimeiguang.com
TYD2806 · Solar 36W · 3000K warm whiteEnquire →