CPD1201 Solar Bollard Lights for Pathways and Garden Borders
Outdoor photos show the CPD1201 beside planted walkways at dusk. Take a closer look at its design, solar configuration and options for your project.

YMG presents the CPD1201 solar bollard light beside planted walkways in a series of outdoor photographs taken at dusk. The images show its square head, illuminated stepped diffuser and open-frame body against hedges and paving. For buyers comparing solar bollard lights for pathways, they provide a close view of the product in a landscape setting.
The photographs also show details that matter when choosing a model: where the solar panel sits, how the base meets the paving, and how planting surrounds the light. Together with the published specifications, these views help project buyers and distributors assess the CPD1201 for garden borders and pedestrian routes.
A closer look at the walkway setting
In one view, the CPD1201 stands along the narrow stone edge between a red paved path and a hedge. Light falls across the nearby leaves and the edge of the paving. The dark body sits against the dense foliage, while the illuminated head draws the eye at dusk.
Another view shows the light beside grey paving and green shrubs. This angle shows the long opening through the body and the broad fixing plate at its base. Looking through the opening, you can still see the planting and ground behind the lamp.
These two views offer useful references for a landscape plan. A narrow border needs room for the fixing plate as well as future plant growth. Beside a wider paved area, the fixture's height and position become part of the view along the path. For a similar scheme, start by marking the walking route, planting line and proposed light positions on the plan.

Square head, stepped diffuser and open-frame body
The CPD1201 combines a broad square head with two upright sides around an open centre. Rounded edges soften the outline of the dark body. At the bottom, a flat fixing plate provides the base mounting arrangement.
The close-up photographs show the stepped cover beneath the head. Its nested ridges remain visible when the lamp is lit, giving the underside a layered profile. From the side, the glowing cover forms a clear horizontal shape above the taller body.
The overhead view reveals the solar panel within the dark border on top of the head. This puts the charging surface in the same assembly as the light. When reviewing a sample, view it from above as well as from the path. Each angle shows a different part of the design that customers will see outdoors.

Solar and AC options for different sites
The CPD1201 range includes solar and AC versions. The photographed solar model has its panel built into the top of the head. YMG lists a 4.5 W solar panel and a 3.2 V, 8 Ah LiFePO4 battery for the solar configuration.
Solar selection starts with the proposed location. The panel needs access to sunlight, so nearby hedges, tree canopies and buildings belong in the site review. A position that looks open during one visit may receive shade at another time of day. Allow for seasonal changes and the mature height of the plants, too.
An AC version is another option to review where the project has a planned mains supply. The choice should follow the site's power arrangements and required lighting schedule. Specify the intended version in your enquiry so the quotation and sample match the project.
For solar orders, request the operating mode and expected lighting duration under stated charging conditions. Those details help you assess the configuration against the hours when people use the path.

CPD1201 specifications at a glance
The following values are listed on the CPD1201 lawn light product page.
| Item | Published specification |
|---|---|
| Model | CPD1201 |
| Power supply options | Solar / AC |
| Solar panel | 4.5 W |
| Battery for the solar version | LiFePO4, 3.2 V / 8 Ah |
| LED chips | 30 pcs, OSRAM 2835 |
| Listed dimensions | 235 × 165 × H400 / 600 / 800 mm |
| Material | Die-cast aluminium + PC |
| Colour temperature options | 3000K / 6000K |
| Protection rating | IP65 |
| Installation | Base-mounted |
The 4.5 W value describes the solar panel rating. Request the electrical details for your selected power version when preparing the final specification.
Choosing height, light colour and placement
The listed heights of 400, 600 and 800 mm give buyers three sizes to review against the landscape plan. Compare each height with the adjacent hedge, border wall and paving level. A sample placed at the proposed location can help you judge how much of the lamp remains visible as planting grows.
YMG lists 3000K and 6000K colour temperature options. The 3000K option produces warm white light, while 6000K has a cooler white appearance. Choose the colour alongside other lighting on the site, including entrance lights and wall lights. Viewing samples together makes differences easier to judge.
Mounting space also deserves attention. The photographs show the plate close to the edge of the walkway. For your project, review the base drawing and fixing-hole positions against the prepared mounting surface. Keep the walking route clear and leave access for cleaning the panel and maintaining the surrounding planting.
Set the distance between lights using the selected configuration's light output and distribution, the path width, and the required light levels. The photographs provide a visual reference for the form and setting. A layout review or sample trial is the next step for assessing coverage along a complete route.
Questions buyers ask about solar pathway lighting
How long will the solar CPD1201 run after charging?
The published product page lists the panel and battery specifications but does not state a verified operating duration. Ask YMG for the lighting schedule, output setting and test conditions for the version you intend to order. Share the project location and the hours of use so those requirements can be reviewed together.
How far apart should CPD1201 lights be placed?
Spacing depends on the light distribution, mounting height and site requirements. Send the path width, a simple layout and the intended lighting purpose. These give the supplier or lighting designer a basis for reviewing the positions and quantity.
Can the product be supplied with our branding?
YMG accepts enquiries about logo marking, product labels and packaging. Submit your artwork, target market and estimated quantity for a review of the available options. The OEM and branding enquiry page provides a place to share those requirements.
Preparing a CPD1201 enquiry
For project purchasing, send a site photograph or layout with your preferred height, light colour and power version. Include the estimated quantity and destination country. If you are building a retail or distributor range, add the packaging languages, label requirements and any logo artwork you already have.
You can also compare the CPD1201 with other models in the YMG lawn light collection before selecting a sample. Consider the head shape, body proportions and mounting arrangement alongside the specifications.
To discuss this model, request a CPD1201 sample or quotation. Tell the team how and where you plan to use it, and which details you need to confirm before ordering.